Wednesday, April 4, 2012

EXPLOSIVES


1.

C-4

C-4
By Tom Harris
C-4, or composition 4, is a type of plastic explosive. The key idea of plastic explosives, also known as plastic bonded explosives (PBX), is to combine explosive chemicals with a plastic binding material. The binder coats the explosive material, so it's less sensitive to shock and heat. This makes it relatively safe to handle the explosive. It also makes the explosive material highly malleable. It can be molded into different shapes to change the direction of the explosion.
C-4 contains the following: RDX - 91 percent; Di(2-ethylhexyl) sebacate - 5.3 percent; Polyisobutylene - 2.1 percent; Motor oil - 1.6 percent. The explosive material in C-4 is cyclotrimethylene-trinitramine (C3H6N6O6), usually called RDX ("royal demolition explosive" or "research development explosive"). The additive material is made of polyisobutylene, the binder, and di(2-ethylhexyl) sebacate, the plasticizer, which makes the material malleable). It also contains small amounts of motor oil and some 2, 3-dimethyl-2, 3-dinitrobutane (DMDNB), which functions as a chemical marker for security forces.
To make blocks of C-4, explosives manufacturers mix powdered RDX with water to form a slurry. They then add the binder material, dissolved in solvent, and blend the materials with an agitator. The solvent is then removed through distillation, and the water is removed by drying and filtering. The result is a fairly stable, solid explosive with a consistency similar to modeling clay.
Because of the stabilizer elements, it takes a considerable shock to set off a chemical reaction in the C-4. Only a detonator, or blasting cap will do the job right. Once the chemical reaction is triggered, C-4 decomposes and releases a variety of gases (notably, nitrogen and carbon oxides). These gases expand at about 26,400 feet per second, which applies a huge amount of force to everything in the surrounding area. At that expansion rate, it is impossible to outrun the explosion; to an observer, the explosion is nearly instantaneous, although it actually has two phases. Initial expansion inflicts most of the damage. It also creates a low-pressure area around the explosion's origin; after the outward blast, gases rush back in to the partial vacuum, creating a second, less-destructive inward energy wave.
A small piece of C-4 packs a pretty big punch. Less than a pound of C-4 could potentially kill several people, and a handful of military issue M112 blocks of C-4, weighing about 1.25 lbs. each, could demolish a truck.



2.

MOAB

MOAB
By Marshall Brain
On March 11, 2003, the USAF tested one of the largest conventional bombs ever built. It is called the MOAB -- Massive Ordnance Air Burst. It is a bomb designed to destroy heavily reinforced targets or to smash ground forces and armor across a large area.
The MOAB is currently the largest conventional (as opposed to nuclear) bomb in the U.S. arsenal. It weighs 21,000 pounds, is 30 feet long and 40.5 inches in diameter. The MOAB is a satellite-guided, very large "smart bomb," that explodes about 6 feet above the ground.
The idea behind an "air burst" weapon, as opposed to one that explodes on contact with the ground, is to increase its destructive range. A bomb that penetrates the earth, then bursts, tends to send all of its force either down into the ground or straight up into the air; air burst weapons propel a great deal of energy sideways.
The MOAB replaces the BLU-82 (aka the "Daisy Cutter"), a 15,000-pound air-burst bomb developed during the Vietnam conflict. The Air Force could clear out trees in a 500-foot-diameter circle by dropping a Daisy Cutter -- creating an instant helicopter landing site.
Rather than launching from a bomber through bomb bay doors, the MOAB is pushed out of the back of a cargo plane like a C-130. It rides on a pallet that is pulled out of the plane by parachute; after launch, the pallet separates from the MOAB so that the bomb can fall. It uses a GPS-based guidance system to direct the payload to its target.
The MOAB contains approximately 18,000 pounds of tritonal - a mixture of 80%TNT and 20% aluminum powder. The aluminum improves the brisance - the speed at which the explosive develops maximum pressure -- of the TNT. The addition of aluminum makes tritonal about 18% more powerful than TNT alone.



3.

Cruise Missiles

Cruise Missiles
By Marshall Brain
A cruise missile is basically a small airplane with no pilot. Cruise missiles have a wingspan of 8.5 feet, use turbofan engines, and can 500 to 1,000 miles, depending on the configuration.
A cruise missile's purpose is to deliver a 1,000-pound high-explosive bomb to a very precise target location. The missile itself is destroyed when the bomb explodes. Most of the cruise missiles we hear about in the news are Tomahawk cruise missiles that launched from destroyers.
Cruise missiles are 20 feet long and 21 inches (0.52 meters) in diameter. When launched, they include a 550-pound solid rocket booster, and weigh about 1.5 tons. The booster falls away once its fuel is burned up. At that point, the wings, tail fins and air inlet unfold, and the turbofan engine takes over. The turbofan engine produces about 600 pounds of thrust by burning approximately 150 gallons of RJ4 fuel from the time of launch. These missiles reach a cruising speed of nearly 550 mph.
The value of cruise missiles is their incredible accuracy. It's commonly stated that they "can fly 1,000 miles and hit a target the size of a single-car garage." Cruise missiles are also fly very low to the ground , keeping them out of range of most radar detection systems.
There are four systems that guide a cruise missile to its target: the Inertial Guidance System (IGS); Terrain Contour Matching (Tercom); a Global Positioning System (GPS), and Digital Scene Matching Area Correlation (DSMAC). The IGS roughly keeps track of where the missile is located based on detected acceleration. Tercom employs an on-board 3-D terrain database, which "sees" the terrain it is flying over using radar and matches this to the 3-D map stored in memory. Tercom is responsible for a cruise missile's ability to "hug the ground" during flight. GPS uses the military's network of satellites, and an onboard GPS receiver, to detect its position very accurately. Once a missile is near its target, it switches to a "terminal guidance system" to choose the point of impact, which may be pre-programmed by the GPS or Tercom system. The DSMAC system employs a camera along with an image correlator to locate a target, and can be especially useful if a target is moving. A cruise missile may also carry thermal imaging or illumination sensors similar to those used in smart bombs.



4.

Nuclear Bombs

Nuclear Bombs
By Craig Freudenrich, Ph.D. and John Fuller
Freudenrich, Ph.D., Craig, and John Fuller.  "How Nuclear Bombs Work."  05 October 2000.  HowStuffWorks.com. 26 February 2010.
Nuclear bombs involve the forces that hold the nucleus of an atom together, especially atoms with unstable nuclei. There are two basic ways that nuclear energy can be released from an atom. The first is nuclear fission, in which the nucleus of an atom is split into two smaller fragments and a neutron. The second method is nuclear fusion, in which two small atoms, usually hydrogen or its isotopes (deuterium, tritium), fuse together to form a larger one (helium or helium isotopes). Earth's sun produces energy through nuclear fusion. In either process, fission or fusion, staggering amounts of heat energy and radiation are given off.
To build an atomic bomb, you need a source of fissionable or fusionable fuel, a triggering device, and a way to allow the majority of fuel to fission or fuse before the explosion occurs so that the bomb doesn't fizzle out.
Fission bombs use uranium-235 as fuel. Uranium is the heaviest naturally occurring element on Earth, and it has two isotopes - uranium-238 and uranium-235, both of which are only barely stable because they have very high numbers of neutrons. U-235 is one of the few materials that can undergo induced fission. Instead of waiting more than 700 million years for uranium to decay naturally, the element can be broken down much faster if a neutron collides with a U-235 nucleus. The nucleus will absorb the neutron right away, causing it to become unstable and split. As soon as the nucleus captures a neutron, it splits into two lighter atoms, and emits two or three new neutrons. These two new atoms emit gamma radiation while they are settling into their new states. When a fission bomb is working properly, more than one neutron ejected from each fission causes another fission to occur in a chain reaction.
Fusion bombs, also called thermonuclear bombs, have higher kiloton yields and greater efficiencies than fission bombs. To design a fusion bomb, some problems have to be solved. The fuels used for fusion, deuterium and tritium, are both gases, and are difficult to store. Tritium is scarce and has a brief half-life, so the fuel would have to be continuously replenished. The fuel, whether deuterium or tritium, must be highly compressed at a high temperature to initiate the fusion reaction.
Several of these problems can be solved by encasing a fission bomb within a fusion bomb. To visualize this design, imagine an implosion fission bomb in a bomb casing, along with a cylinder of uranium-238 (tamper). The tamper contains lithium deuteride (fuel), and a hollow rod of plutonium-239, in the center of the tamper cylinder.  A shield of uranium-238 separates the tamper cylinder from the implosion bomb. Detonation of the bomb causes the following to occur:
  1. The fission bomb implodes, emitting off X-rays.
  2. These X-rays heat the interior of the bomb and the tamper; the shield prevents premature detonation of the fuel.
  3. The heat causess the tamper to expand and burn away, exerting pressure inward against the lithium deuterate.
  4. The lithium deuterate is compressed by about 30-fold.
  5. The compression shock waves initiate fission in the plutonium rod.
  6. The fissioning rod emits off radiation, heat, and neutrons.
  7. The neutrons enter the lithium deuterate, combine with the lithium and make tritium.
  8. The combination of high temperature and pressure cause tritium-deuterium and deuterium-deuterium fusion reactions to occur, producing more heat, radiation, and neutrons.
  9. The neutrons produced by the fusion reaction induce fission in the uranium-238 pieces from the tamper and shield.
  10. Fission of the tamper and shield pieces produced even more radiation and heat.
  11. The bomb explodes.


All of these events occur in about 600 billionths of a second (550 billionths of a second for the fission bomb implosion, 50 billionths of a second for the fusion events). The result is an immense explosion with a 10,000-kiloton yield.



5.

Grenades

Grenades
By Tom Harris
Broadly speaking, a grenade is simply a small bomb designed for short-range use. The idea is very simple: Combustible material is ignited to make an explosion -- a rapid expansion of gases that produces powerful outward pressure. The essential elements of a grenade, are combustible material and an ignition system.
Many different combustible materials are used in grenades, which generate a range of explosion types. Some explosions spread fire, and others release a lot of smoke. Some produce little more than a loud noise and a flash of light. Still others release toxic gas.
Ignition systems also differ, but they usually fall into one of two categories: time-delay igniters and impact igniters. The function of both is to set off an explosion after the grenade is a fair distance away from the thrower. The igniter in an impact grenade is activated by the impact force of landing on the ground. With a time-delay grenade, the thrower sets off a fuze, which ignites the grenade after a certain amount of time has passed (generally a few seconds).
The most widely used grenade on the battlefield is the time-delay fragmentation anti-personnel hand grenade. The primary job of this grenade is to kill or maim nearby enemy troops. To create maximum damage, the grenade is designed to launch dozens of small metal fragments in every direction when it explodes.
The firing mechanism is initiated by a spring-loaded striker inside the grenade. The striker is usually held in place by a striker lever on top of the grenade, which in turn is held in place by the safety pin. A soldier grips the grenade so the striker lever is pushed up against the body, pulls out the pin and then throws the grenade.





6.

IEDs

IEDs
By Craig Freudenrich, Ph.D.
Freudenrich, Ph.D., Craig. "How IEDs Work." 10 December 2008. HowStuffWorks.com. 26 February 2010.
Whether you call it a homemade bomb, a booby trap or an improvised explosive device, an IED is simple to make, easily hidden and extraordinarily destructive. These deadly devices are one of the No. 1 killers of soldiers in Iraq.
IEDs are basically homemade bombs with five basic parts: a power supply, a trigger, a detonator, a main charge, and a container. The power supply is often car batteries or alkaline flashlight batteries. The trigger or switch may be a radio signal, trip wire, timer or firing button controlled by a person. Cell phones, cordless phones, radios, and garage door openers are often used as removed triggers. Detonators are typically electrical, like those used for explosions in construction. The main charge may be comprised of unexploded landmines. Containers vary, but are often designed to force the blast in a specific direction. Additional components packed in the device could include projectiles for shrapnel, such as ball bearings, nails and stones, or hazardous, flammable, or toxic chemicals. IEDs could also be used as the explosive part of a biological or radioactive dirty bomb.
Unfortunately, IEDs are relatively simple to make with a little research, time and training. Batteries, cell phones and radios are readily available; detonators and explosives like C-4, Semtex, and TNT, can be found at construction sites and on oil rigs.
Aside from how it's made, an IED is like any other bomb -- it explodes. When the primary charge explodes, gases heat up and expand rapidly outward under pressure. This creates shock or blast waves. The waves travel outward at about 1,600 feet per second over hundreds of yards or more depending upon the amount of explosive. The explosion cracks or fragments the container and launches shrapnel outward at high speeds.
The heat from the explosion causes combustion and fire. The heat and fires from the explosion can cause secondary fires. Blast waves leave a partial vacuum, which causes air to rush back in under high pressure, which pulls in debris and shrapnel. Thus, an IED explosion causes damage to vehicles and property primarily through the blast wave, heat and fires.
Kevlar body armor may shield soldiers from the shrapnel released in IED explosions. In addition, armored vehicles, called Mine Resistant Ambush Protected (MRAP) vehicles, have been designed to protect against the blast impacts of an IED.



7.

Landmines

Landmines
By Kevin Bonsor
Landmines are explosive devices that are triggered by pressure or a tripwire; they're typically found on or just below the surface of the ground. Landmines are used by the military to disable any person or vehicle that comes into contact with it by an explosion or fragments released at high speeds. Since 1975, landmines have killed or maimed more than a million people, and are the subject of a worldwide effort to ban further landmine use and clear away existing landmines.
Landmines are cheap, easy-to-make, effective weapons that can easily be deployed over large areas to prevent enemy movements. They are usually placed in the ground by hand, but mechanical minelayers can also plow the earth, drop and bury mines at specific intervals. These intervals are often grouped into mine fields, which are meant to prevent an enemy fro¬m passing through a particular area, to force an enemy to move through a particular area, or to slow an enemy until reinforcements can arrive. While more than 350 varieties of mines exist, they can be broken into two categories: Anti-personnel (AP) mines and Anti-tank (AT) mines.
Anti-personnel landmines are designed to derail or push back foot soldiers from a given area. These mines kill or disable their victims, and are activated by pressure, tripwire or remote detonation. There are also smart mines, which automatically de-activate themselves after a certain amount of time. Anti-personnel mines fit into three basic categories: Blast Mines, Bounding, and Fragmentation mines. There are several-hundred different kinds of anti-personnel mines in use by many countries.
Anti-tank mines are similar to their anti-personnel cousins, but much larger. They are pressure activated, but typically designed so that they will not be triggered by the footstep of a person. Most anti-tank mines need an applied pressure of 348 to 745 pounds in order to detonate - typically, a tank or other military vehicle. Most of these mines are found on roads, bridges and large clearances where tanks may travel.



8.

Rocket-Propelled Grenades

Rocket-Propelled Grenades
By Shane Speck
Speck, Shane.  "How Rocket-Propelled Grenades Work."  11 March 2004.  HowStuffWorks.com. 26 February 2010.
At its core, a rocket-propelled grenade (RPG) can be thought of as something like a rocket-mortar hybrid. It's an explosive, projectile weapon consisting of a grenade along with a launching device. In many cases, this launcher can be reloaded, which reduces the overall cost of the RPG, but at the expense of increased weight.
The launcher is essentially a tube that rests on an operator's shoulder. This tube is open at both ends, and a projectile with a small rocket engine is affixed to the front end. Firing usually involves a trigger mechanism used to activate the grenade's rocket engine. A brief, high-powered burst of ignited gases launches the grenade a short distance, between 500 to 1,000 feet, depending on the target and the skill of the operator. The projectile travels toward a target and usually explodes upon impact. Some modern grenades use an electronic fuze system that causes detonation after a particular time-span has elapsed.
Most RPGs follow this basic operational design, although different models feature various refinements and modifications. Some are designed to be most effective against troops; others work well against armored vehicles and tanks, launching high explosive anti-tank projectiles.
Although over forty years have passed since the 1961 introduction of the RPG, the rocket-propelled grenade remains one of the most common and effective infantry weapons currently in use. Rugged and simple, suitable for downing helicopters, disabling tanks or attacking buildings at close range, in the hands of a skilled operator, the RPG is a lethal and versatile weapon that will remain popular for some time.
Lighter weapons with greater range and destructive capability are always being developed, and there may even be the possibility of automatic or semi-automatic rocket-propelled grenade systems. Laser guidance systems, while expensive, would greatly increase accuracy. An encoded laser could be trained on a target, providing reference information to the rocket and allowing it to make in-flight trajectory corrections. Other systems may use GPS satellite technology.



9.

Smart Bombs

Smart Bombs
By Tom Harris
Harris, Tom. "How Smart Bombs Work." 20 March 2003. HowStuffWorks.com. 26 February 2010.
A conventional bomb consists of some explosive material packed into a sturdy case with a fuze mechanism. The fuze has a triggering device -- typically a time-delay system, an impact sensor or a target-proximity sensor -- which sets the bomb off. When the trigger goes off, the fuze ignites the explosive material, resulting in an explosion.
A "dumb bomb" is a bomb with only these elements, dropped from an airplane such as the B-2 Bomber. The bomb is considered "dumb" because it simply falls to the ground without actively steering itself. A bomber might need to drop dozens, or even hundreds of dumb bombs to take out a target effectively.
"Smart bombs," by contrast, control their fall precisely in order to hit a designated target dead on. A smart bomb is essentially an ordinary dumb bomb that also contains an electronic sensor system, a built-in control system(an onboard computer), a set of adjustable flight fins, and a battery.
When a plane drops a smart bomb, the bomb becomes a particularly heavyglider. It doesn't have any propulsion system of its own, like a missile does, but it does have forward velocity (by virtue of being dropped from a speeding plane). It also has flight fins that generate lift and stabilize its flight path.
The control system and adjustable fins give the bomb a way to steer itself as it glides through the air. While the bomb is "in flight," the sensor system and control system track the designated target on the ground. The sensor system feeds the control system the relative position of the target, and the control system processes this information and figures out how the bomb should turn to steer toward the target.
To actually turn the bomb, the control system sends a message to actuators that adjust the flight fins. These fins work the same basic way as the various flaps on an airplane. By tilting the fins in a particular direction, the control system increases the drag acting on that side of the bomb. As a result, the bomb turns in that direction.
This adjustment process continues until the smart bomb reaches its target, and the fuze mechanism sets off the explosive. Smart bombs generally have proximity fuzes, which set off the explosive just before the bomb reaches the target, or impact fuzes, which set off the explosive when the bomb actually hits something.
The smart-bomb technology of today day is Boeing's JDAM (Joint Direct Attack Munition). The basic idea behind the JDAM program is to outfit existing "dumb" bombs with sophisticated rear guidance sections. The JDAM "tail kit" includes adjustable tail fins, a control computer, an inertial guidance system and a GPS receiver. Both the GPS receiver and the inertial guidance system allow the bomb to locate itself in space. The GPS receiver figures out its position by interpreting GPS satellite, while the inertial guidance system monitors the bomb's movements, tracking its path from its launch position. Costing about $20,000 per tail kit (which can be added to an existing warhead), it's much more economical than $120,000+ laser-guided bombs.




10.

Torpedo

Torpedo
Check out photos of torpedoes here.
A torpedo is an underwater, self-propelled, explosive weapon that can be launched from a submarine, a surface ship, an airplane, or a helicopter. It is a key naval weapon used against warships, merchant vessels, and submarines. Torpedoes can also be used against fixed targets, such as harbor installations. Like mines, torpedoes explode below the waterline.
Torpedoes designed for use against surface ships usually travel just below the surface of the water, to avoid passing under the hull of the target. Those designed to be used against submarines can follow and strike a target at depths of up to 2,500 feet. Many torpedoes travel at speeds of 40-50 knots. Conventional torpedoes may have ranges of less than 2,000 yards, while rocket-assisted torpedoes can strike targets more than 10 miles away.
Torpedoes are cigar-shaped devices containing an explosive with a detonation system, a guidance system, and a propulsion system. Torpedoes used by the U.S. Navy are generally from 8-21 feet long, 10-21 inches in diameter, and weigh as little as 265 pounds up to 4,000 pounds or more. Most contain conventional high explosives; a few carry nuclear warheads. The largest United States torpedoes carry about 650 pounds of conventional explosive.
Torpedoes are detonated by contact detonators, which set off the explosive when the torpedo strikes the target, or by magnetic detonators, which set off the explosive when the torpedo enters the magnetic field of a steel ship. They can be guided by any of several systems: straight-running torpedoes that are held on course by a gyrocompass; acoustic, or homing, torpedoes that are guided to their targets by sound; and wire-guided torpedoes that are electrically guided from onboard an attacking vessel.
Modern torpedoes are usually built multiple guidance systems, often combining active and passive acoustic homing capabilities. The United States Mk-48 heavy torpedo has not only active and passive acoustic homing guidance but also provisions for wire guidance.
Newer submarines launch torpedoes through tubes along the sides of the submarine, near the bow. Older subs have tubes in the bow and stern. Surface ships launch torpedoes from tubes on the deck. Compressed propels a torpedo free of its tube before its own propulsion and guidance systems take over. Most torpedoes are propelled by jet turbines, though some use battery-powered electric motors.

I HOPE THAT IT WAS VERY MUCH INFORMATIVE RO YOU ALL
THANKS!!!


Top Ten Infantry Fighting Vehicles



1.

Humvee





Humvee

When the call went out to develop a vehicle to replace the much-loved and ubiquitous jeep, the winning design had to be exceptional. The High Mobility Multipurpose Wheeled Vehicle, or Humvee, first appeared in 1980 and a contract was awarded to makers AM General for nearly 60,000 vehicles. This figure has now risen to over 160,000, with Humvees sold to more than 36 countries. 



Its low center of gravity and strong frame make the Humvee a very dependable transport in over 12 different configurations. From armored carrier to special operations, from missile platform to recoilless rifle vehicle, this amazing fighting vehicle is fast making a reputation for itself. 


The Humvee's ability to carry eight troops plus crew, top speed of over 65 mph and .50-caliber machine gun further strengthen that reputation. Its all-terrain capability is global, with the U.S. Army using the Humvee for operations in Somalia, Iraq and Afghanistan. Though the Humvee has been criticized by some for its vulnerability, the sheer usefulness of this vehicle has led to its service in situations that normally call for much more heavily armed and armored vehicles.g.





2.

LVT




 LVT MK-4 (Landing Vehicle Tracked)


Known as amphibious tractors, or amtracks for short, the LVTs were the backbone of all the Marine landings during the long and bloody campaign of the Pacific War.Introduced in 1944, the innovative LVT MK-4 had a rear door so that either a jeep or gun could be unloaded. This new door also saved the lives of countless Marines, as they did not have to clamber over the side as in previous LVTs. 


With its powerful 75-mm howitzer, the LVT MK-4 could deliver a hail of fire to protect its 30 disembarking troops. Also, it did not have to stop at the water's edge. Propelled by tracks instead of a propeller, this LVT was just as at home on water, sand or jungle mud as it was on hard roads or grass. It was also used by the British forces in river crossings, particularly the Rhine, during the war in Europe.


So respected was the LVT, that Navy leader Vice Adm. Edward L. Cochrane wrote: "There is not the slightest shadow of doubt that the overwhelming victories of our forces at Tarawa, Kwajalein, Saipan, Tinian, Guam, Palau and Iwo Jima would not have been possible without the Amtracks."





3.
Halftrack




M-3 Halftrack


Inspired by a 1931 French design, the U.S. Army started work on a halftrack in 1938 and the basic M-3 design went into production in 1941. Used throughout the Army, the M-3 was an essential part of the armored divisions — each motorized infantry battalion had approximately 62. 


By the end of World War II, more than 40,000 M-3 halftracks had been produced in a wide variety of configurations, including personnel carrier, artillery tractor and communications vehicle. Because of the drive to its front axle, the M-3 was easier to maneuver than its counterpart, the German Sd.Kfz. 251. However, it lacked all-terrain usage and the ability to carry troops. 


The M-3 served around the world during World War II, as well as for many years afterward. Although production stopped in 1945, the M-3 was still going into combat with the Israeli Defense Force in the 1980s.




4.
Bren Gun Carrier




 Universal Bren Gun Carrier


The British Universal Carrier, or Bren Carrier as it was popularly known, was the most widely used of all armored fighting vehicles during World War II. Able to carry between four and 14 troops, the Bren Carrier came in several versions, including machine gun, flamethrower, mortar platform, troop carrier, medi-vac and gun tractor. It was also capable of being glider borne and airlifted with a 6-pound anti-tank gun. 


From the battlefields of Europe to the jungles of the Far East, this vehicle was involved in every theater of action during World War II. Many of these carriers were captured by the Germans, who modified them to carry a 37-mm anti-tank gun and called them Panzerjaeger Bren. In fact, the Bren was the only carrier used by soldiers from every nation involved in the conflict of 1939-45. With a service record second to none, and with more than 200,000 built, this World War II vehicle richly deserves its accolades.




5.


BMP-1




 BMP-1


Once the armored personnel carrier had shown its worth in World War II, wheeled and tracked vehicles entered service with all the world's armies. The Soviet Red Army was the first to move the idea of a personnel carrier forward so that infantrymen would be able to fight from it, rather than have to dismount and lose the protection of the vehicle's armor. 


The first sight the West had of the brand-new vehicle was at a parade in Red Square in 1967. The Bronevaya Maschina Piekhota (BMP-1) had firing ports and vision blocks to enable its passengers to fire from within the vehicle. It also featured an automatic loading 73-mm turret-mounted gun firing fin-stabilized HEAT missiles. The BMP was amphibious, propelled though the water by its tracks. 


Though the BMP revolutionized armored warfare, it was not without drawbacks. The armor was thin and the low silhouette made it cramped for crew and passengers, but it was still used by many of the worlds' armies. Its successor, the BMP-2, has been made in large numbers and seen combat in Afghanistan and Iraq.




6.
Sd.Kfz. 251




 Sd.Kfz. 251


When Nazi Germany began developing its new theory of blitzkrieg in the 1930s, it became obvious that its infantry and artillery would need a new type of cross-country vehicle if they were to keep up with the tanks of the Panzer divisions. The result was one of the most important fighting vehicles of its time — the halftrack. 


First issued in 1938, the Sd.Kfz. 251 halftracks proved their worth during the fighting in Poland and showed that they were the ideal partners for the fast-moving German armor. Used initially as either armored personnel carriers or towing vehicles for artillery, the halftracks soon took on many other roles - such as anti-tank, anti-aircraft vehicle, ambulance, command vehicle and even a rocket launcher variant known as the "infantry Stuka" or "howling cow."


The halftracks' outstanding cross-country ability was due to the unique sophisticated track system, though the lack of power to the front wheels made them harder to maneuver than their American equivalent. Employed in every major battle fought by the German army in World War II, the Sd.Kfz. 251 was constantly in demand. It was kept in service for another 10 years after the war by the Czech army.




7.
Stryker




 Stryker


The Stryker is the first new armored vehicle to be introduced into U.S. Army service since 1980. This versatile warrior can be used as either an infantry carrier or mobile gun system armed with a 105-mm cannon. 


With a top speed of 62 mph and the ability to carry nine troops plus crew, this all-terrain vehicle provides both a highly mobile troop transport and a powerful gun in the fluid combat environment of the war against terror.


With the ability to be airlifted by the C-130 Hercules, the Stryker can reach a combat zone much faster than the weighty Abrams tank, which has been criticized for being too heavy and unable to cope with off-road situations. The Stryker has seen action in Iraq and Afghanistan, and more than 2,400 have been contracted to be built.




8.
MCV-80 Warrior




 MCV-80 Warrior


The British MCV-80 Warrior, like the U.S. Bradley, reflected a change in the philosophy of armored personnel carrier design that had come about when the Soviet BMP-1 was introduced. APCs were now infantry fighting vehicles, capable of giving fire support and engaging enemy vehicles.


During the recent Iraqi conflict, a Warrior demonstrated its ability to take punishment when, caught in a fierce firefight, its driver managed to get the vehicle out of harm's way and save the lives of his badly wounded troops. For this action the driver was awarded Britain's highest military honor, the Victoria Cross. 


Self-contained, the Warrior carries sufficient stores and equipment to fight on the battlefield for a sustained period of 48 hours, plus a range of 410 miles, a speed of 47 mph and a 7.62 chain gun. The Warrior earns huge praise from all that have fought with, and against, it. This tough APC is now the standard vehicle of the British armed forces.




9.

Bradley




 M-2 Bradley


The shortcomings of armored personnel carriers as battlefield vehicles - thin armor and limited firepower — led to the concept of the infantry-fighting vehicle in the late 1960s. Rather than simply carry an infantry squad to the battlefield, where they would dismount to fight, the IFV would enable infantrymen to fire their weapons from within the vehicle and engage targets while still protected behind armor.


Derived from Soviet and German designs, the Bradley IFV went into production in 1981. With laminate spaced armor on top of an aluminum hull, the M-2 provides greater protection for its passengers than the M-113. The Bradley also has greater firepower available in the form of a 25-mm chain gun that can fire depleted uranium rounds. This powerful weapon knocked out more Iraqi armor during Operation Desert Storm than the 120-mm guns of the Abrams tank and is on the U.S. Army's books for the foreseeable future.





10.

M-113




 M-113


After World War II had shown the need for an armored personnel carrier for infantry, it became obvious that a fully tracked vehicle would offer the best combination of speed and all-terrain mobility. The M-113 went into production in the early 1960s. 


With the ability to carry 10 troops plus crew, an all-terrain speed of 40 mph and a range of 300 miles, it was an immediate winner. Since then over 80,000 have been built, and the M-113 has been exported to nearly 50 countries. Amphibious and air portable, the M-113 has been used in combat in Vietnam, the Middle East and Iraq. 


Besides fulfilling its basic personnel carrier role, the vehicle has served as a mortar carrier, command, anti-aircraft and flamethrower vehicle. The M-113 is still going strong and will probably be one of the most widely used armored vehicles ever built.


I HOPE THIS POST WAS ALSO INTERESTING FOR YOU 
       THANKS

Total Pageviews

Followers

CNN.com